Select Your Vehicle
A Complete Guide to Fleet Maintenance of Brake Systems for Trucks
February 18, 2022
Share on facebook
Share
Share on twitter
Tweet
Share on print
Print
Share on email
Email

Brake systems are designed to prevent vehicles from moving. They are one of the most important safety features of a vehicle. A well-maintained brake system can make sure that you are safe on the road. Without them, it would be difficult to control speed or stop quickly in an emergency situation which could lead to collisions with other vehicles or pedestrians.

 

In this article, we will highlight a few important things about brake systems.

Brake Fluid Maintenance and Replacement

Brake fluid is a very important component of the braking system. It acts as a hydraulic fluid and provides the necessary pressure to stop your car. Brake fluid also helps in preventing corrosion and rusting of brake lines and other components of the braking system.

 

It is important to keep a check on brake fluid levels in your car. If you see any leaks, you should replace the old brake fluid with new one immediately. You should also change your brake pads at regular intervals. The average lifespan of brake fluid is about 4 years or 60,000 miles, whichever comes first. You should replace it if it has been more than 4 years or if you have driven more than 60,000 miles since the last replacement.

 

How Often Should I Perform Brake System Maintenance on My Trucks?

Brake system maintenance is a routine process that truckers should perform on their trucks. It is necessary to keep the brakes in good condition and to avoid brake failure. Brake failure can lead to accidents and increased road maintenance costs.

 

The frequency of brake system maintenance varies depending on the type of truck and its use. Semi-trucks, for example, need more frequent brake checks than small trucks because they usually carry heavier loads and travel longer distances. Truckers should always consult the owner’s manual for their specific vehicle for instructions on how often to change brake fluid, check brake pads, and inspect other parts of the braking system.

 

What are the Most Common Causes of Truck Brake Failure?

 

  • Truck brakes are important safety features for any vehicle.

  • The most common causes of truck brake failure include:

    • Faulty brake pads

    • Faulty calipers

    • Faulty master cylinder

    • Faulty wheel cylinders

    • Dirty or worn linings

 

Conclusion

The brakes are indeed one of the most important components of a truck. They are the only way to stop or slow down a vehicle. That is why it is so important to make sure they are in good condition at all times.

 

There are many reasons for brake system maintenance, but the most common ones are wear and tear, rust, corrosion, and contamination. The brake pads need to be replaced periodically because they wear out with use. The rotors can also get rusted or corroded if not cleaned regularly and should be replaced if needed. Contamination can happen when brake fluid leaks onto other parts of the truck’s braking system and should be cleaned up right away to prevent future problems. 

 

Check out this page to learn more about Fleet Brake Pads. Visit the NRS Brakes store for high-quality brake pads.

Close Menu
×

Cart